XBee ZigBee Module, 50mW, Series 2.5, RPSMA Antenna Connector

Description

XBee ZigBee Module, 50mW, Series 2.5, RPSMA Antenna Connector
XBP24-BSIT-004
The Pro series has the same pinout and command set of the basic series with an increase output power of 50mW. These modules take the
802.15.4
stack (the basis for Zigbee) and wrap it into a simple-to-use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems — really anything with a serial port. Point-to-point and multi-point networks are supported.
ZigBee Module Features
3.3V @ 295mA
250kbps Max data rate
50mW output (+17dBm)
1 mile (1600m) range
RPSMA connector
Fully FCC certified
Four 10-bit ADC input pins
10 digital I/O pins
128-bit encryption
Local or over-air configuration
AT or API command set
Certified for use in the U.S. and Canada
ZigBee Module Documentation
Digi XBee Series 2.5 Page
Datasheet
User Manual
Dimensional Drawings
SFE Eagle Library
has this part
Note:
Series 1 and Series 2.5 XBee modules have the same pinout. However, Series 1 modules cannot communicate with Series 2.5 modules. Likewise, 2.5 modules are incompatible with the newer ZB Series 2. You can, however,
change the firmware of this ZNet Series 2.5 module
to the new ZB Series 2 firmware.