Wireless PIR Motion Detector Alarm Add-on Module, ZigBee/MiWi

Description

Wireless PIR Motion Detector Alarm Add-on Module, ZigBee/MiWi
MOD-ZIGBEE-PIR
The MOD-ZIGBEE-PIR features an MRF24J40 transceiver connected to a Microchip PIC18F26K20 MCU that is pre-loaded with an open-source MiWi and Zigbee stack. When the PIR motion detector senses motion, the MRF24J40 sends a wireless alarm to Zigbee nodes. This board can be added easily to any microcontroller system that has a UEXT connector (see below).
Should you need or want to re-program the on-board PIC18F26K20 microcontroller, the board has a six-pin mini ICSP connector. An inexpensive programming option would be the
PIC-KIT3
plus the
PIC-Mini-ICD-6
adapter.
Wireless Motion Detector Alarm Module Features
MRF24J40 + PIC18F26K20 with open-source MiWi and Zigbee stack
PIR sensor motion detector sends wireless alarm to Zigbee nodes when motion is detected
RF Transceiver — MRF24J40 IEEE 802.15.4 Standard compliant 2.4 GHz RF transceiver
UEXT connector (see below)
6-pin mini ICSP connector
On-board antenna
On-board temperature sensor — TCN75A
Option for external power supply through EXT_PWR
Holders for two 1.5V AA batteries
EXT/BAT switch
Reset circuit with button
Two user buttons
Two status LEDs
PCB: FR-4, 1.00 mm (0.039"), solder mask, silkscreen component print
Dimensions: 70 × 20 mm (2.76 × 0.80")
UEXT Connector
The UEXT connector provides a solderless way to connect this module to a system with a microcontroller. There are dozens of microcontroller systems and development boards that can connect to this module via UEXT using the supplied cable. Click on the architectures below for lists of compatible boards:
ARM7, ARM9, ARM Cortex
AVR, Arduino
MSP430, CC430
PIC18, PIC32, Pinguino
TMS320