-40%
USB Breakout Board, Mini-B Connector
$ 2.61
- Description
- Size Guide
Description
This is a simple board that breaks out the five mini-USB pins so that you can add a USB port to your project that has a USB controller or a USB-capable MCU.Important Note on Shipping Delays via United States Postal Service: Currently we see significant delays in shipments via USPS, up to 3 weeks (!) to deliver within the USA. If you need your item fast, we suggest you select Fedex shipping upon checkout, instead of the standard USPS shipping.
This is not a USB controller; it just provides access to the USB pins.
The pins are available in standard 1-inch spacing, so you can use this on typical prototyping breadboards (you must provide and solder header pins yourself).
If you solder some header pins to this and use a couple jumper wires, you can use this in combination with the
ADP-5V1A
and a
mini-USB cable
to source 5V power to any device.
The following are links to bundles that contain a strip of 40 breakaway headers and a pack of 10 jumper wires of varying lengths. You can use these with this board:
Pins and 3" F-F wires
Pins and 5" F-F wires
Pins and 7" F-F wires
Pins and 5" M-F wires
Alternatively you can get some items separately:
Strip of 40 header pins
Pack of 12 F-F wires
Pack of 10 M-M wires