-40%
Transceiver nRF2401A with Chip Antenna, 2.4GHz
$ 1.55
- Description
- Size Guide
Description
Transceiver nRF2401A with Chip Antenna, 2.4GHzWRL-00152
This nRF2401A module has the same minimum interface of seven pins (all in a 0.1" spaced connector) as the original nRF2401A module, but the size is reduced by over 60%.
It features the nRF2401A 2.4GHz transceiver module with built-in chip antenna designed around the Nordic Semiconductor nRF2401A with high sensitivity and range. The board comes with an empty 0.1" spaced footprint ready for a straight header, right-angle header (recommended), or your own wires/umbilical cable.
The following pins are broken out:
VCC: 3.3V
CE: Chip Enable
CS: Chip Select
DR1: Data Ready Channel 1
CLK: Clock Input
DAT: Data I/O
GND: Ground
Specifications:
Frequency: 2.4~2.524 GHz
Modulation type: GFSK
Operating Voltage: 3V
Output Power: +0dBm
Data Rate: 1Mbps and 250Kbps
Miniscule footprint size: 0.5x0.675" (13x17mm)
Operating Temperature: -40 ~ +85 C
Long range:
50ft. indoors
125ft. line of sight
Built-in 2.45GHz ceramic antenna
Very low cost