TMS320 DSP/ARM Emulator and 1149.7 Adapter, XDS100v3 compatible

Description

TMS320 DSP/ARM Emulator and 1149.7 Adapter, XDS100v3 compatible
TMS320-XDS100-V3
The XDS100v3 in an updated XDS100v2 design with support for the IEEE 1149.7 protocol and ARM Ltd's Single Wire Output (SWO). XDS100v3 emulators are recommended mainly for users who require support for IEEE 1149.7. Most devices do not require this. For most users, the
TMS320-XDS100-V2
is recommended.
The TMS320-XDS100v3 hardware is designed to work with Code Composer Studio 5.x software to program all TMS320F 32-bit real-time microcontrollers (digital signal processors). It supports all microcontrollers and DSPs supported by XDS100v2 in Code Composer Studio, i.e. TMS320C28x, TMS320C54x, TMS320C55x, TMS320C64x+, TMS320C674x, ARM9, ARM Cortex R4, ARM Cortex A8, ARM Cortex A9 and ARM Cortex M3.
TMS320 Emulator & IEEE 1149.7 Adapter Features
TMS320-XDS100V3 hardware is designed to work with CCS 5.x software
IEEE 1149.7 capable emulator with a mini-USB interface
Can function as an 1149.7 adapter for use with existing scan controllers
Support for ARM Ltd's Single Wire Output (SWO)
Software compatible with XDS100v2 (except link delay and IEEE 1149.7 modes)
Physical jumper to select Emulator or Adapter mode
Operates in 1149.7 Class 4, up to 25 MHz
LED to indicate IEEE 1149.7 Class 4 operation
LED to indicate operation in Adapter mode
Supported devices: TMS320C28xx, TMS320C54xx, TMS320C55xx, TMS320C674x, TMS320C64x+, TMS320C66x, ARM9, ARM Cortex A9, ARM Cortex A8, ARM Cortex M3, ARM Cortex R4
Works with ARM 14-pin and ARM 20-pin layouts
Works with targets 1.65V to 5.0V
Uses standard 0.1" 2×7 pin and 2×10 pin JTAG connector (ribbon cables included)
No need for external power supply; all power is taken from USB and the target
Dimensions 95 × 46 mm (3.75" × 1.8") + 15 cm (8") ribbon cables