-40%

Tiny Arduino Leonardo Compatible Board, micro-USB, microSD, UEXT

$ 3.95

Availability: 100 in stock
  • Condition: New
  • Item must be returned within: 14 Days
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • Brand: Unbranded
  • All returns accepted: Returns Accepted

    Description

    The OLIMEXINO-NANO is a tiny board with an Atmel ATmega32U4 AVR microcontroller which is loaded with Arduino Leonardo firmware. It can be programmed via a micro-USB cable in the same way as the standard
    Arduino Leonardo
    , and features both a microSD card slot (on the bottom side) and a UEXT connector in addition to a proprietary miniature shield interface.
    The miniature shield interface allows you to plug in and stack mini shields in the same way you would on a full-sized Arduino with full-sized shields. You can see compatible mini shields in the
    Optional Recommended Products
    list below.
    The UEXT connector allows you to add another peripheral module easily. The UEXT can provide I2C, RS232, SPI and power to the external device. There are dozens of UEXT modules available. Please see the
    UEXT Boards Category
    for a full list.
    Tiny Arduino Leonardo Compatible Board Features
    ATmega32U4 MCU with Arduino Leonardo firmware
    Works with the Arduino IDE
    User button
    Reset button
    microSD card slot
    Connectors for stackable mini shields
    UEXT connector
    Intelligent power supply can take power from USB or via external battery (such as the optional Battery Shield)
    Ultra-low-power design for battery-powered, handheld or worn applications
    Dimensions: 30 × 30 × 8 mm (not counting UEXT connector)
    Stacking Shields
    The following picture shows this OLIMEXINO-NANO with the
    OLIMEXINO-NANO-BB
    (Breadboard Connector Shield) on it, then the (Battery Shield) stacked onto the Breadboard Connector Shield. The Breadboard Connector Shield is then plugged into a
    Power options
    Instead of being tethered to a PC, you can use the
    TOL-11456
    (1A) or
    WA-USB-2A
    wall-mount supplies which use a USB cable for power delivery. The optional OLIMEXINO-NANO Battery Shield gives you a choice between using a coin cell battery or a LiPo battery, or even a barrel jack adapter for that shield's JST connector. The shield, batteries and adapters can be selected in the
    Optional Recommended Products
    list below. Just remember that the batteries and the JST adapters can't be used directly on this board; they require the Battery Shield which also is in the list.
    Tiny Arduino Leonardo Compatible Board Resources
    OLIMEXINO-NANO Schematic
    OLIMEXINO-NANO Design Files
    for Eagle
    OLIMEXINO-NANO Code Examples
    for Arduino IDE
    OLIMEXINO-NANO-BAT
    Solderless Breadboard
    .