-40%
Prototyping Board

Prototyping Board

$ 1.71

Availability: 234 in stock
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Condition: New
  • All returns accepted: Returns Accepted
  • Brand: Unbranded
  • Restocking Fee: No
  • Country/Region of Manufacture: United States

    Description

    These 2 layer through hole prototyping boards were originally designed for analog design. They have a built in dual rail power supply section which is designed for standard components. Spaces for 1N4001 diodes, 1000uF caps, .01 uF and 100 pF noise filter caps, 78XX and 79XX regulators, and a 3-pin connection for a center tapped transformer. Top layer has a solid ground around all connections. Hole spacing in prototyping area is 0.1 inch. 726 total holes including ground and power. Will easily handle standard DIP IC widths of 0.3 or 0.6
    inch
    or any other IC of 0.1 inch pitch. Grounds are available down both sides and in center of board. There are four mounting holes, one in each corner. These boards were manufactured at a facility here in the U.S. and are .066 inches thick with solder mask on both sides and stenciling on top. Board is 2 3/8 by 4 1/2 inches.