-40%

PIC18F14K50 USB-to-RS232 Module, UEXT, ICSP

$ 7.91

Availability: 11 in stock

Description

MOD-USB-RS232 is a module board with a PIC18F14K50 microcontroller loaded with firmware that makes the module a simple USB-to-UART converter. The board has a UEXT connector, which can be set via jumpers as device or host. This allows you to use this board as an add-on to other systems, or add other devices to it.
As a device (the default configuration), this module provides an easy way to add a virtual COM port to an existing system with a UEXT connector.
A mini-ICSP connector is on board that will allow you to load your own firmware into the microcontroller, should you want to use this module as a host controller to other UEXT modules.
USB-to-RS232 Module Features
MCU: PIC18F14K50 20-pin USB Flash microcontroller with nanoWatt XLP Technology
Mini-USB connector
Status LED
Male UEXT connector plus 10-pin cable for it
RESET circuit
Mini-ICSP connector
FR-4, 1.5 mm, red soldermask, component print
Dimensions: 35.70 × 25.83 mm (1.41 × 1.02")
UEXT Connector
The UEXT connector on this board by default provides a solderless way to connect this module as a slave device to another system with a microcontroller. There are dozens of microcontroller systems and development boards that can connect to this module via UEXT using the supplied cable. Click on the architectures below for lists of compatible boards:
ARM7, ARM9, ARM Cortex
AVR, Arduino
MSP430, CC430
PIC18, PIC32, Pinguino
TMS320
As a host device
With a change of jumper settings, the UEXT connector will allow you to control external devices via the PIC microcontroller on this board. The UEXT can provide I2C, RS232, SPI and power to the external device. Please see the for a full list of slave modules that can plug into the UEXT port.
USB-to-RS232 Module Resources
User manual and schematic
Firmware source and hex code
UEXT Boards Category