-40%
Philips LPC2294 (ARM) Header Board, USB, CAN
$ 15.48
- Description
- Size Guide
Description
Philips LPC2294 (ARM) Header Board, USB, CANLPC-H2294
LPC2294 Header Board Features
MCU: 16/32-bit LPC2294 ARM7TDMI-S with 256 kBytes Program Flash, 16 kBytes RAM, External Memory Bus, RTC, 4x 10-bit ADC 2.44 µS, 2x UARTs, 4x CAN, I2C, SPI, 2x 32-bit Timers, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation
1MB (256K x 32 bit) 12 ns 71V416 SRAM
4MB (2048K x 16 bit) 70 ns TE28F320C3BD70 C3 Intel FLASH
Standard JTAG connector with ARM 2x10 layout for programming and debugging with
ARM-JTAG
Powered through USB port (or through external 5V DC supply when not connected to USB)
USB-to-RS232 converter
Two on-board voltage regulators 1.8V and 3.3V up to 800mA current
Power supply LED and filtering capacitor
Slide switch for choosing ICSP or RUN mode
Slide switch for selecting Boot from External or Internal Flash
RESET button
RESET circuit can be controlled externally by Philips ISP utility via USB-RS232 virtual port
JRST jumper for enabling external reset control by RS232
DBG jumper for JTAG enabling
BSL jumper for bootloader enabling
14.7456 MHz crystal installed in socket for easy replacement
Extension headers for all µC ports with IDC34 connectors (same as PC floppy drive cable)
PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print
LPC2294 Header Board Resources
LPC2294 Header Board Schematic
Test software and basic routines
for access to external Flash/SRAM
OpenOCD + Eclipse set of projects 1.00
See the complete list of projects included
here
.
This board is a low-cost tool with limited support. It does not include any documentation other than that contained on this web page and does not ship with any software.