-40%
Philips LPC2138 (ARM) Header Board, RS232
$ 13.58
- Description
- Size Guide
Description
Philips LPC2138 (ARM) Header Board, RS232LPC-H2138
This header board allows you to add the functions of an NXP/Philips LPC2138 ARM7TDMI-S microcontroller to your project. The two rows of 2x16 extension pins are separated by 1.9 inches (48.26 mm).
LPC2138 Header Board Features
LPC2138 16/32-bit ARM7TDMI-S microcontroller with 512 kBytes Flash, 32 kBytes RAM, RTC, 8x 10-bit ADC 2.44 µS, 2x UARTs, I2C, SPI, 2x 32-bit Timers, 8x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation
Standard
JTAG connector
with ARM 2x10 pin layout for programming/debugging (such as with
ARM-JTAG
)
On-board voltage regulator 3.3V with up to 800mA current
Single power supply; 6V AC or DC required
Power supply LED
Status LED
Power supply filtering capacitor
Two-channel RS232 interface
RESET button
RESET circuit can be controlled externally by Philips ISP utility via RS232
DBG jumper to enable JTAG
BSL jumper to enable bootloader
JRST jumper to enable/disable external RESET control via RS232
14.7456 MHz crystal in socket, allowing easy communication setup (4x PLL = 58.9824 MHz CPU clock)
32.768 kHz crystal and RTC backup battery connector
Extension headers for all MCU ports
PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print
Dimensions: 76 x 55 mm (3.0 x 2.2")
Space between the pin rows: 48.26 mm (1.9")