-40%
Philips LPC2138 (ARM) Board, RS232, 16x2 LCD, Relay & Buzzer
$ 11.79
- Description
- Size Guide
Description
Philips LPC2138 (ARM) Board, RS232, 16x2 LCD, Relay & BuzzerLPC-MT2138
This microcontroller board features a Philips LPC2138 (ARM7TDMI-S core) microcontroller; 2x16 LCD; 5 push buttons; RS232 interface; Relay; Buzzer; and status LED. A JTAG connector allows for easy in-circuit debugging and programming.
The board ships completely assembled and tested.
LPC2138 Board Features
MCU: 16/32-bit LPC2138 ARM7TDMI-S with 512 kBytes Program Flash, 32 kBytes RAM, RTC, 8x 10-bit ADC 2.44 µS, 2x UARTs, I2C, SPI, 2x 32-bit Timers, 8x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation
JTAG connector
as per ARM's 2x10-pin layout,
ARM-JTAG
compatible
14.7456 MHz crystal in socket, allows easy communication setup (4x PLL = 58.9824 MHz CPU clock)
RS232 interface circuit with SUB-D 9-pin connector
2-line, 16-character LCD.
Note
: The LCD shares some pins with the JTAG interface, so it is
not
possible to debug LCD display routines while the JTAG interface is enabled.
Five buttons (can not be read during JTAG use)
Dallas iButton port
Frequency input
Relay with 10A/250V AC contacts
Buzzer
Status LED
RESET circuit
RESET button
Bootloader-enable jumper and pullup
DEBUG jumper for JTAG enable/disable
RTCK pullup resistors
Power plug-in jack
Power supply: 6V AC / +9V DC
Three on-board voltage regulators: 1.8V, 3.3V and 5V
Power supply filtering capacitor
Four mounting holes
PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print
Dimensions: 120 x 38 mm (4.75 x 1.5")
LPC2138 Bootloader
The LPC2138 bootloader program is enabled when the board's BSL jumper is shorted at time of power up. With the bootloader program enabled you can download code into the LPC2138's Flash memory with the Philips ISP programming utility via UART0 (DB9 connector). Note that if you want to run code in Flash memory, the BSL jumper must be open at time of power up, otherwise the bootloader will stay in control and will not allow your program in the Flash memory to run.
LPC2138 Board Resources
LPC2138 Board Schematics
LPC2138 Board Documentation
(Windows Help file; 248KB)
Button, LED, Buzzer, and Relay sample code
LCD sample code
RTC sample code
RS232 sample code
OpenOCD + Eclipse set of projects 1.00
See the complete list of projects included
here
.
The LCD module on the LPC2138 board uses the popular Hitachi HD44780 display controller.