Philips LPC2129 (ARM) Prototype Board, Dual CAN, Dual RS232

Description

Prototype Board for LPC2129 ARM7TDMI-S Microcontroller with Dual CAN and RS232 Interfaces
LPC2129 (ARM) Board Features
MCU: 16/32-bit ARM7TDMI-S with 256 kBytes Program Flash, 16 kBytes RAM, RTC, 4x 10-bit ADC 2.44 µS, 2x UARTs, 2x CAN, I2C, SPI, 2x 32-bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation
14.7456 MHz crystal
Two-channel RS232 interface with two RS232 Sub-D 9-pin connectors
Two-channel CAN interface with drivers (MCP2551) and two Sub-D 9-pin connectors
JTAG connector
as per ARM's 2x10 pin layout,
ARM-JTAG
Interface compatible
iButton interface circuit
Frequency input connector
RESET circuit can be controlled externally by Philips ISP utility via RS232
RESET button
Two status LEDs
Two buttons
Potentiometer connected to analog input AIN0
BSL jumper for bootloader enable
DBG jumper for JTAG enable
JRST jumper to enable external RESET control by RS232
Single power supply: 7V to 9V DC required
Power supply filtering capacitor
Power supply status LED
Three on-board voltage regulators 1.8V, 3.3V and 5V with up to 800mA current
Extension headers for all µC ports
PCB: FR-4, 1.5 mm (0.062"), green soldermask, white silkscreen component print
Dimensions: 115 x 80 mm (4.5 x 3.2")
Four mounting holes
LPC2129 (ARM) Board Resources
This prototype board is a low-cost tool with limited support. It does not include any documentation other than that contained on this web page and does not ship with any software.
LPC2129 Board Schematic
OpenOCD + Eclipse set of projects 1.00
See the complete list of projects included
here
.