-40%
NXP LPC2148 (ARM) Prototype Board, USB, Dual RS232
NXP LPC2148 (ARM) Prototype Board, USB, Dual RS232

NXP LPC2148 (ARM) Prototype Board, USB, Dual RS232

$ 31.15

Availability: 100 in stock
  • Brand: Unbranded
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back
  • Condition: New
  • Item must be returned within: 14 Days
  • MPN: Does Not Apply
  • Return shipping will be paid by: Buyer

    Description

    NXP LPC2148 (ARM) Prototype Board, USB, Dual RS232
    LPC-P2148
    This prototype board allows you to build your own projects around a Philips LPC2148 ARM7TDMI-S microcontroller.
    LPC2148 Prototype Board Features
    LPC2148 16/32-bit ARM7TDMI-S microcontroller with 512 kBytes Flash, 42 kBytes RAM, USB 2.0, RTC, 10-bit ADC (as low as 2.44 µS per channel), 2x UARTs, 2x I2C, SPI, 2x 32-bit Timers, 6x PWM, 8x CCR, 1x DAC, WDT, 5V tolerant I/O, up to 60 MHz operation
    Standard JTAG connector with ARM 2x10 pin layout for programming/debugging
    USB connector and USB link LED
    Two-channel RS232 interface and drivers
    SD/MMC card connector
    Two buttons
    Trimpot connected to ADC
    Two status LEDs
    Buzzer
    10-pin expansion connector for future add-on modules like MP3, RF 2.4GHz, RFID etc.
    2x SPI connectors
    I2C connector
    On-board voltage regulator 3.3V with up to 800mA current
    Single power supply: 6V AC or 9V DC required
    Power supply LED
    Power supply filtering capacitor
    RESET circuit can be controlled externally by Philips ISP utility via RS232
    RESET button
    DBG, BSL slide switch
    JRST jumper to enable/disable external RESET control via RS232
    12 MHz crystal in socket
    32.768 kHz crystal and RTC backup battery connector
    Extension headers for all MCU ports
    PCB: FR-4, 1.5 mm (0.062"), white silkscreen component print
    Dimensions: 110 × 100 mm (4.3 × 3.9")