-40%
Microchip PIC18F4550 USB Board

Microchip PIC18F4550 USB Board

$ 15.83

Availability: 26 in stock
  • Condition: New
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 14 Days
  • Brand: Unbranded
  • Refund will be given as: Money Back
  • MPN: Does Not Apply
  • All returns accepted: Returns Accepted

    Description

    The SBC44UC is an embedded (PIC based) Single Board Computer (SBC) with a full-speed USB interface and is assembled with the Microchip PIC18F4550 microcontroller. It has been designed to work with the free Microchip USB Software. This includes software for developing:
    Human Interface Device (HID) class firmware
    Communication Device Class (CDC) firmware
    Mass Storage Class Firmware
    Microchip Bootloader
    Microchip Custom Driver
    The SBC44UC can be powered by the USB bus or by an external power supply. A unique relay circuit is used to select between USB or external power which ensures that full USB voltage is available to the SBC board and possible user applications. Since the voltage supplied by the USB bus is specified between 4.75V to 5.25V, it is very important that the full voltage is obtained, considering that many electronic components require a minimum of 4.75V.
    Microchip PIC18F4550 USB Board Features
    PIC18F4550 CPU
    33 general-purpose user-programmable I/O ports
    13 user-programmable, 10-bit Analog-to-Digital converters
    2 user-programmable, 10-bit CCP units that can be used for PWM or Capture/Compare functions
    1 USART
    2 Comparators
    One 8-bit and three 16-bit timers
    32k Bytes of user-programmable Flash memory
    2048 Bytes of RAM
    256 Bytes of non-volatile internal EEPROM; has socket for additional external EEPROM chip
    Socket for adding an MCP23008 I/O expander
    Red user LED on PIC port RB6
    The Micro-MaTch connector allows you to use this board to drive one of the
    LCD2S-
    Serial LCD displays found in our
    LCD Displays category
    . Multiple I2C devices can be daisy-chained together using the Micro-MaTch connector.
    Build an Enclosed System
    Using the Compact Daughterboard connector, this USB board can be used as a control module for the
    Input-Output-Relay Board
    , which comes in a sturdy enclosure.
    You also can make a fully enclosed system by connecting this board to the
    Add-on Prototyping Board with 10 I/O Ports
    or the
    Add-on Prototyping Board with 24 I/O Ports
    , each of which comes in an enclosure.