-40%
LPC2294 (ARM7) Board, Ethernet, CAN, RS232, SD/MMC, 1MB SRAM

LPC2294 (ARM7) Board, Ethernet, CAN, RS232, SD/MMC, 1MB SRAM

$ 31.67

Availability: 100 in stock
  • Return shipping will be paid by: Buyer
  • Item must be returned within: 14 Days
  • Condition: New
  • Refund will be given as: Money Back
  • MPN: Does Not Apply
  • All returns accepted: Returns Accepted
  • Brand: Unbranded

    Description

    LPC2294 (ARM7) Board, Ethernet, CAN, RS232, SD/MMC, 1MB SRAM
    LPC-L2294-
    1MB
    LPC2294 Development Board with 1MB SRAM, 4MB Flash, CAN, RS232, Ethernet, SD/MMC
    LPC2294 Development Board Features
    NXP LPC2294 16/32-bit ARM7TDMI-S MCU with 256 kBytes Program Flash, 16 kBytes RAM, External memory bus, RTC, 4x 10-bit ADC at 2.44 uS, 2x UARTs, 4x CAN, I2C, SPI, 2x 32-bit Timers, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60 MHz operation
    Standard
    JTAG connector
    with ARM 2x10-pin layout for programming/debugging (such as with
    ARM-JTAG
    )
    1MB 70 ns SRAM
    4MB (2Mx16bit) 70 ns TE28F320C3BD70 C3 Intel Flash
    CS8900A Ethernet controller with RJ45 connector (16-bit mode with interrupt)
    RS232 port
    CAN drivers and connector
    SD/MMC card connector
    All LPC2294 port signals available on extension connectors
    Reset button
    Reset circuit can be controlled externally by NXP ISP utility via USB-RS232 virtual port
    Jumper setting to boot from external memory
    Jumper setting for ISP/RUN mode selection
    User button
    Two on-board voltage regulators: 1.8V and 3.3V with up to 800mA current
    Dimensions: 118 x 101 mm ( 4.65 x 3.97")