-40%
LPC1768 (ARM Cortex-M3) Header Board

LPC1768 (ARM Cortex-M3) Header Board

$ 18.48

Availability: 100 in stock
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • All returns accepted: Returns Accepted
  • Item must be returned within: 14 Days
  • Brand: Unbranded
  • Condition: New

    Description

    LPC1768 (ARM Cortex-M3) Header Board
    Important Note on Shipping Delays via United States Postal Service: Currently we see significant delays in shipments via USPS, up to 3 weeks (!) to deliver within the USA. If you need your item fast, we suggest you select Fedex shipping upon checkout, instead of the standard USPS shipping.
    BB-LPC1768-S
    The BlueBoard-LPC1768-S is a header board that makes the LPC1768 pins available via pin headers at the bottom of the PCB. The board can be plugged into the optional
    Blueboard Base
    development board, which provides access to peripheral functions such as 2x RS232, USB, VGA, PS/2 and a SD/MMC card holder. Alternatively you can use this LPC1768 header board to quickly wire up your own prototype board.
    The LPC1768 microcontroller has 512KB of internal Flash and 64KB RAM. Ethernet MAC, USB Device/Host/OTG interface, 8-channel general-purpose DMA controller, 4 UARTs, 2 CAN channels, 2 SSP controllers, SPI interface, 3 I2C-bus interfaces, 2-input plus 2-output I2S-bus interface, 8-channel 12-bit ADC, 10-bit DAC, motor control PWM, Quadrature Encoder interface, 4 general-purpose timers, 6-output general purpose PWM, ultra-low power Real-Time Clock (RTC) with separate battery supply, and up to 70 general-purpose I/O pins
    BLUEBOARD-LPC1768-S Features
    Dimensions: 47 × 47 mm
    Two layer PCB (FR-4 material)
    32KHz crystal for RTC
    12MHz crystal
    Test LED
    What tools to use
    All the tools that support LPC1700 Cortex-M3 series of microcontrollers can be used. Below are some possible choices. See the websites of the respective manufacturers for details.
    KEIL µVision4 IDE (32k limited evaluation version is available)
    Rowley Crossworks (30-day evaluation version available)
    IAR workbench (32K code limited evaluation version available)/li>
    GNU-based open-source tool chains: GNU C, Eclipse, IDE, OpenOCD, etc.
    For further details on open-source ARM development, check out the following links:
    GNU toolchain setup with OpenOCD
    emIDE
    GNU Tools for ARM
    (toolchain only; can be included into Eclipse)
    WinARM
    OpenOCD