LPC11U14 ARM Cortex-M0 Board, 68x128 LCD, USB, RS232, PS/2

Description

LPC11U14 ARM Cortex-M0 Board, 68x128 LCD, USB, RS232, PS/2
Important Note on Shipping Delays via United States Postal Service: Currently we see significant delays in shipments via USPS, up to 3 weeks (!) to deliver within the USA. If you need your item fast, we suggest you select Fedex shipping upon checkout, instead of the standard USPS shipping.
BB-LPC11U14
BlueBoard is a cost-effective prototyping solution. It is a ready-to-run development platform. A mini-USB cable is included.
This BlueBoard contains the NXP LPC11U14 ARM Cortex-M0 microcontroller. This controller has 32KB of internal Flash and 8 KB SRAM. The LPC11U14 operates at CPU frequencies up to 50MHz. It supports In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software. The peripheral functions of the LPC11U14 include a programmable WatchDog Timer (WDT), one UART, one I2C-bus interfaces (Fast-mode Plus with a data rate of
1 Mbit/s),
one SSP controller, an 8-channel 10-bit ADC, four general-purpose counter/timers with a total of four capture inputs and 13 match outputs, an integrated PMU power-on Reset, and up to 42 general-purpose I/O pins. GPIO pins can be used as edge- and level-sensitive interrupt sources.
LPC11U14 Development Board Features
Dimensions: 110mm × 110mm
Two-layer PCB (FR-4 material)
Power: DC 6.5V with power LED. On-board linear regulators generate +3.3V/500mA and +5V/500mA from power supply USB connector (as alternate power source)
10-pin and 20-pin Cortex Debug connectors for SWD (Serial Wire Debug)
ISP, Wakeup, External Interrupt and reset switch
12 MHz crystal for MCU; 32 kHz crystal for RTC
Extension headers for all microcontroller pins
RS232 connector, PS/2 connector, microSD/MMC card connector, USB type-B mini connector with Link LED
64 × 128 graphical LCD with Backlight control
High-accuracy external RTC connected on I2C bus
RTC battery holder (battery not included)
10K potentiometer for ADC