-40%
LPC1114 ARM Cortex-M0 Board, 68x128 LCD, USB, RS232, PS/2

LPC1114 ARM Cortex-M0 Board, 68x128 LCD, USB, RS232, PS/2

$ 15.83

Availability: 100 in stock
  • All returns accepted: Returns Accepted
  • Condition: New
  • Item must be returned within: 14 Days
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Brand: Unbranded

    Description

    LPC1114 ARM Cortex-M0 Board, 68x128 LCD, USB, RS232, PS/2
    Important Note on Shipping Delays via United States Postal Service: Currently we see significant delays in shipments via USPS, up to 3 weeks (!) to deliver within the USA. If you need your item fast, we suggest you select Fedex shipping upon checkout, instead of the standard USPS shipping.
    BB-LPC1114
    BlueBoard is a cost-effective prototyping solution. It is a ready-to-run development platform with code snippets to demonstrate applications for every feature supported on the board. A USB cable is included.
    This BlueBoard contains the NXP LPC1114 ARM Cortex-M0 microcontroller. This MCU has 32KB of internal Flash and 8KB SRAM. The LPC1114 operates at CPU frequencies up to
    50 MHz.
    It supports In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software. The peripheral functions of the LPC1114 include a programmable WatchDog Timer, a UART, a Fast-mode Plus I2C bus interface, an SSP controller, an 8-channel 10-bit ADC, and four general-purpose counter/timers with four capture inputs and 13 match outputs. The chip also features an integrated Power Management Unit with power-on-reset, and 42 general-purpose I/O pins, which can be used as Edge- and Level-sensitive interrupt sources.
    LPC1114 Development Board Features
    Dimensions: 110mm × 110mm
    Two-layer PCB (FR-4 material)
    Power: DC 6.5V with power LED. On-board linear regulators generate +3.3V/500mA and +5V/500mA from power supply USB connector (as alternate power source)
    10-pin and 20-pin Cortex Debug connectors for SWD (Serial Wire Debug)
    ISP, Wakeup, External Interrupt and reset switch
    12 MHz crystal for MCU; 32 kHz crystal for RTC
    Extension headers for all microcontroller pins
    RS232 connector, PS/2 connector, microSD/MMC card connector, USB type-B mini connector with Link LED
    64 × 128 graphical LCD with Backlight control
    High-accuracy external RTC connected on I2C bus
    RTC battery holder (battery not included)
    10K potentiometer for ADC