FT2232C USB-to-Dual-UART 40-pin DIP Module

Description

FT2232C USB-to-Dual-UART 40-pin DIP Module
USBMOD5
The USBMOD5 is an integrated module based on the FTDI FT2232C Dual Channel USB UART / FIFO IC. The module features two Multi-purpose UART/FIFO controllers that can be configured in several different modes depending on the application.
USB-to-Dual-UART 40-pin DIP Module Features
Single module Dual Channel UART/FIFO USB solution
Based on the FTDI FT2232C Dual Channel USB UART / FIFO IC
On-board 6 MHz crystal
External EEPROM on board for USB enumeration data
No external passive components required
40-pin Dual In-line Package which is ideal for prototyping
Fits into a standard 40-pin 600mm IC socket
Transfer Data Rate 300 to 1 Mega Baud (RS232)
Transfer Data Rate 300 to 3 Mega Baud (TTL and RS422/RS485)
Auto Transmit Enable control for RS485 serial applications using TXDEN pin
FT245BM-style FIFO interface option with bi-directional data bus and simple 4-wire handshake interface
Enhanced Bit-Bang Mode interface option
Synchronous Bit-Bang Mode interface option
CPU-Style FIFO Interface Mode option
Multi-Protocol Synchronous Serial Engine (MPSSE) interface option
MCU Host Bus Emulation Mode option
Fast Opto-Isolated Serial Interface Mode option
Interface mode and USB Description strings configurable in external EEPROM
EEPROM configurable on board via USB
Support for USB Suspend and Resume conditions via PWREN#, and SI/WU pins
Integrated Power-On-Reset circuit, with optional Reset input and Reset Output pins
5V and 3.3V logic I/O Interfacing with independent level conversion on each channel
Integrated 3.3V LDO Regulator for USB I/O
Integrated 6 MHz to 48 MHz clock multiplier PLL
USB Bulk or Isochronous data transfer modes
4.35V to 5.25V single supply operating voltage range
UHCI/OHCI/EHCI host controller compatible
USB 2.0 Full Speed (12 Mbits/second) compatible