-40%
Front-End: 4x In, 2x Relay for PIC Boards
$ 4.22
- Description
- Size Guide
Description
Front-End: 4x In, 2x Relay for PIC BoardsIOR44-42
The IOR44 Front-End Board can be connected to the front-end connector of certain PIC Boards (see list below) adding 2 analog or digital inputs, 2 open collector outputs and 2 relay outputs.
The following I/O ports are made available via a 3.81mm 10-pin terminal block connector (Phoenix connector).
4 Analog/Digital inputs
2 Relay outputs, rated at 2A at 30V DC or 1A at 125V DC
When connected to a PIC Main Board, the front-end board can provide the main board with power via terminal block pins 9 and 10. Note, that when doing this no power should be applied to the main board.
Front-end board connector pin B6 (usually routed to PIC port pin RB6) is connected to a red LED.
A matching 10-pin Phoenix screw terminal connector that plugs into the connector on the board is included with the board.
Compatible PIC Main Boards
This front-end board can be used with the following PIC boards:
Microchip PIC Board, RS232 & CAN interface, 28-pin PICs (SBC28PC-IR2)
Microchip PIC Board, RS485 & CAN interface, 28-pin PICs (SBC28PC-IR4)
Microchip PIC Board, RS232, 28-pin PICs (SBC28DC)
Microchip PIC Ethernet Board with RS232 Interface (SBC45EC)