Eddy-DK-V2.5 Development Kit, 400MHz AT91SAM9G20 CPU Module

Description

Eddy-DK-V2.5 Development Kit, 400MHz AT91SAM9G20 CPU Module
Eddy-DK-V2.5
Eddy-DK-V2.5 Development Kit with 400MHz AT91SAM9G20 (ARM9) CPU Module, 2x Ethernet, 2x USB Host, 1x USB Device, 2x RS232, 2x RS422/485, SD Card Holder, 256kBit I2C EEPROM, 2kBit SPI EEPROM, 256MB NAND Flash, I2C 16-bit I/O Expander, RTC, Temperature and Light Sensors, Dot Matrix LCD and 4x4 keypad
The Eddy Development Kit (DK) consists of one baseboard and a plug-in
Eddy V2.5 CPU module
. The baseboard makes the various integrated peripherals of the ARM9 CPU available via physical interface connectors. CPU module pins are accessible via expansion headers. Various additional features, such as I2C and SPI connected EEPROMs, I2C I/O Expander; light and temperature sensors connected to the MCU's A/D; Dot Matrix LCD; 4x4 keypad; and additional NAND Flash, allow you to experiment with the many features of the AT91SAM9G20 microcontroller.
Included in the DK are Linux & Windows host-operable IDE, LemonIDE API, source code and powerful testing & management utilities to minimize your development efforts.
AT91SAM9G20 Development Kit Features
LemonIDE, Eclipsed based IDE included
All-in-one visual source code editor, compiler & debugger
SDK including API & source code
Easy-to-use Windows utilities include
COM Port Redirector
for Automatic Serial/LAN conversion,
PortView
for monitoring I/O data and status, and
TestView
for evaluating communication performance and stability.
Eclipse based IDE, LemonIDE Support
LemonIDE is an integrated development environment built on the open-source Eclipse framework. It includes GNU C/C++ Compiler, a Source Code Editor and Debugger. LemonIDE provides an easy and effective GUI (Graphical User Interface) for Application and Firmware Development that run on SystemBase's embedded real-time Linux, Lemonix
SDK, API & Source Code Support
Eddy can upload and execute customized user applications. To enable you to program your own socket/serial communication applications with the least amount of time and effort, the system includes an SDK (Software Development Kit), API (Application Programming Interface) and Source Code.
Windows Utility Support
Utilities to monitor and test your finalized products over network and serial interfaces are provided at no cost. The SystemBase management utilities, COM port redirector, PortView and TestView utilities allow you to monitor and administer your application.
Eddy-DK-V2.5 Specifications
Hardware
NAND Flash
256MB, 8bit I/F. This Flash is in addition to the memory that sits on the CPU module.
SD Card Connector
Push type, Up to 16GB/12.5Mbps
USB Connector
1x Device; 2x Host, Dual-port
LCD Module
128 x 64 dot-matrix
Keypad
4 x 4 matrix
Battery Holder
3V Lithium batter, 235 mAh
LEDs
Power, Ready, 20 Programmable I/O, Console & Serial TXD/RxD
I2C Interface
16-bit I2C Bus GPIO; 256Kbit EEPROM
SPI Interface
2Kbit EEPROM
MCI Interface
SD Card, MMC Socket
ADC Interface
Temp/Light Sensor
Digital I/O
8-port Input, 8-port Output
DIP Switches
Serial or GPIO Select; RS422/485 Select; DIO Common VCC or GND Select; Programming
Jumpers
Boot Mode Select; JTAG Select
Serial Port
2x RS232 DB9 Male; 2x RS422/485 Terminal Block (RS422 & RS485 selected by software)
Console Port
DB9 Male
LAN Port
2x RJ45
JTAG Port
2x 10-pin, 0.1" Standard ARM JTAG
Reset Button
Factory Default & Warm Boot
Input Power
9 to 48V DC
Dimensions
240 × 180 mm
AT91SAM9G20 Development Kit Dimensions
AT91SAM9G20 Development Kit Contents
1x Eddy-CPU v2.5 Module
1x Eddy-DK v2.5 Baseboard
SDK/IDE/Compiler/Document/Utilities CD
Ethernet Cable, Serial Cable, USB Cable (Type B), 12V Power Supply