-40%
Development and Prototyping Board for 4D Display Modules
$ 10.03
- Description
- Size Guide
Description
The 4DevBoard is a compact and low-cost all-in-one development platform for the following intelligent display modules:Important Note on Shipping Delays via United States Postal Service: Currently we see significant delays in shipments via USPS, up to 3 weeks (!) to deliver within the USA. If you need your item fast, we suggest you select Fedex shipping upon checkout, instead of the standard USPS shipping.
µOLED-96-G2
µOLED-128-G2
µOLED-160-G2
µLCD-144-G2
µLCD-24PTU
µLCD-28PTU
µLCD-32PTU
µLCD-32WPTU
This feature-packed board makes an ideal platform for learning and experimenting with those display modules.
4D Development Board Features
On-board DC jack (2.5mm, center positive) for power supply (9V to 12V DC) with built-in switch for automatic battery cut-off to prevent dual connection
PCB connections for installing a 9V battery pin header (not included)
On-board input voltage to 5V regulator that can supply up to 1A of current for the display modules and user circuits
On-board 3.3V regulator that can supply up to 150mA of current for the user circuits
Power switch and LED indicator
8Ω micro speaker with Darlington drive for sound and music
Push-button Reset switch
2×5-pin male header for communicating with and programming your Goldelox Module (µOLEDs and µLCD-144-G2) plugged into the 4DevBoard
2×5-pin male header for programming your µLCD Module (µLCD-24PTU/28PTU/32PTU/32WPTU) plugged into the 4DevBoard, along with a 2×15-pin male header interface to module
10-pin female header for µOLED-128-G2 and µOLED-160-G2 modules
10-pin female header for µOLED-96-G2 and µLCD-144-G2 modules
10-pin and 30-pin female headers for µLCD-24PTU/28PTU/32PTU/32WPTU modules
5-position multi-way switch joystick
10-pin male jumper header for configuration of the 4DevBoard Serial, Audio and Joystick connections
Four user-controllable LEDs ready to be connected to your circuit
Two 170-tier solderless breadboards for quick circuit prototyping
65 Male-Male jumper wires of varying length (45 at
10 cm,
10 at
14.5 cm,
five at
18 cm
, and five at
22.5 cm)
Dimensions: 120 × 90 × 12.7 mm
4D Development Board Resources
4DevBoard Datasheet
4DevBoard 3D PDF
Note:
The images in the datasheet and the 3D PDF are of Rev4 of the board, but currently shipping is Rev5, which has two solderless breadboards installed and a much taller Reset button.