Daisy System 4-channel Isolated 0-48V Solid State Output Switch

Description

Daisy System 4-channel Isolated 0-48V Solid State Output Switch
Important Note on Shipping Delays via United States Postal Service: Currently we see significant delays in shipments via USPS, up to 3 weeks (!) to deliver within the USA. If you need your item fast, we suggest you select Fedex shipping upon checkout, instead of the standard USPS shipping.
DAISY-19
The DAISY-19 module is an industrial-range solid-state switch with four channels. This board is part of the modular Daisy System that can be controlled by the
FOX Board G20
in combination with the
DAISY-1 Adapter
or by the
Terra Board
.
The Daisy ports that can be used are:
D2 or D5 on the DAISY-1 adapter
D11 or D12 on the Terra Board
Be sure to get a
0.05" pitch
2x5 IDC
cable
(FC-19818-10P-FF)
to make the connection. The cable is not included.
Up to four DAISY-19 modules can connect to a DAISY-1 adapter or Terra board by chaining two modules per available port as shown below.
Daisy System Solid State Switch Features
4x Zetex ZXMN6A09G N-channel enhancement mode MOSFETs
4x Toshiba TLP190B photocouplers
Four LEDs to indicate each output state
Drain source voltage: 48V
Continuous source current: 3.5A
Isolation voltage: 2500 Vrms min.
Due to the "floating" opto-isolated N-channel MOSFETs, the DAISY-19 is able to handle different kinds of loads and drive configurations with single and dual power supply. This includes four NPN or PNP, two Half H-Bridge, one Full H-Bridge, or combinations thereof.