-40%

Atmel AT91SAM7S64 (ARM) Header Board, USB

$ 7.91

Availability: 100 in stock
  • Condition: New
  • Item must be returned within: 14 Days
  • Return shipping will be paid by: Buyer
  • All returns accepted: Returns Accepted
  • Brand: Unbranded
  • Refund will be given as: Money Back

    Description

    Atmel AT91SAM7S64 (ARM) Header Board, USB
    SAM7-H64
    Perfect solution for building custom USB peripherals
    AT91SAM7S64 Header Board Features
    MCU: 16/32-bit AT91SAM7S64 ARM7TDMI with 64 kBytes Program Flash, 16 kBytes RAM, USB 2.0, RTT, 10-bit ADC 384 ksps, 2x UARTs, TWI (I2C), SPI, 3x 32-bit timers, 4x PWM, SSC, WDT, PDC (DMA) for all peripherals, up to 60 MHz operation
    JTAG connector
    as per ARM's 2x10 pin layout, for programming/debugging with
    ARM-JTAG
    or other compatible devices.
    USB connector
    Reset circuit
    Reset button
    Status LED
    TST jumper, for SAM-BA downloading
    On-board voltage regulator 3.3V with up to 800mA current
    Single power supply: through USB or from extension header pin
    Power supply LED
    Power supply filtering capacitor
    18.432 MHz crystal in socket
    Extension headers for all MCU ports + RST and power supply
    PCB: FR-4, 1.5 mm (0.062"), soldermask, silkscreen component print
    Dimensions: 50 x 34 mm (2 x 1.3")
    Distance between the headers: 25.4 mm (1")
    Using the SAM Boot Assistant (SAM-BA)
    The PC side of the SAM Boot Assistant, and its User Manual, can be downloaded from
    Atmel's web site
    . To have the AT91SAM7S microcontroller on the SAM7-H64 header board copy the MCU side of SAM-BA into its Flash memory, power down the board and close the TST jumper. Power up the board and wait for 10 seconds, then power down the board and remove the jumper. Now you can begin using the SAM-BA GUI for the SAM Boot Assistant with the SAM7-H64 board plugged into your PC's USB port.
    AT91SAM7S64 Header Board Resources
    SAM7-H64 Schematic
    SAM7-H64 Dimensions
    SAM7-H64 extension header pin assignments
    (PDF file; 11KB)
    Blinking LED project
    and
    Binary code
    for SAM-BA
    Mouse driver
    sample code with project
    UART routines
    project
    SD/MMC read/write routines
    project
    Button reading and temperature measurement
    project
    OpenOCD + Eclipse set of projects 1.00
    See the complete list of projects included
    here
    .
    Note:
    This board does not ship with any documentation or software.
    d images, FAQ, etc.