-40%
Arduino ProtoShield Kit
$ 2.61
- Description
- Size Guide
Description
Arduino ProtoShield KitImportant Note on Shipping Delays via United States Postal Service: Currently we see significant delays in shipments via USPS, up to 3 weeks (!) to deliver within the USA. If you need your item fast, we suggest you select Fedex shipping upon checkout, instead of the standard USPS shipping.
DEV-07914
The ProtoShield mates with the
Arduino Uno
or Duemilanove board and gives you a small soldering area, two general LEDs, access to a BlueSMiRF socket, a general pushbutton switch, and the Arduino reset switch brought to the top level.
This comes in kit form;
you must solder it together yourself
. No assembly instructions are included. All soldering is through-hole (relatively easy) — just be sure to check your component orientation before soldering.
Arduino ProtoShield Kit Contents
1x Protoshield bare PCB
2x Stackable Headers, 6-pin
2x Stackable Headers, 8-pin
2x 5mm Basic Yellow LEDs
2x 330-Ohm Resistors
1x 10k Resistor
2x Momentary Push Buttons
2x 0.1uF Ceramic Capacitors
The lower image shows what the ProtoShield looks like once it is assembled. Note that the headers included do not have the additional pins introduced in the Arduino R3 format.
Arduino ProtoShield Kit Features
All Arduino pins (R2) are brought to the top level
5V, GND, and Raw pins are exposed as well
BlueSMiRF socket for wireless communication between Arduinos
2 general-use LEDs
1 general-use button
Reset button brought to top level