-40%
3-Wheeled Robot Chassis Kit: Base, Motors, Wheels, 4x AA Holder
$ 5.28
- Description
- Size Guide
Description
3-Wheeled Robot Chassis Kit: Base, Motors, Wheels, 4x AA HolderROBOT-3-WHEEL-KIT
This is a bundle of items that allows you to build a three-wheeled robot chassis as seen in the picture. It does
not
come assembled and does not include any control electronics.
3-wheeled Robot Chassis Kit Contents
One
ROBOT-CHASSIS-3
clear plexiglass base. This has plenty of slots and holes for mounting your control circuit, sensors, servos, etc., and routing your wiring.
Two
MG-6-48
gear motors. These operate at 6V and provide a 1:48 gear ratio. If you need more torque, you can replace these with
MG-6-120
(not included).
Two
MG-ACC
gear motor assembly kits (screws, nuts, and mounting plate) that attach to the wheels.
Two
MG-WHEEL
s. Each is 65 mm in diameter and 25 mm wide. They mount to the gear motors.
One
ROBOT-CW
caster wheel, which is provided with mounting hardware.
One
BAT-HOLDER-4XAA
(not pictured) which you can use for motor power via four AA batteries (not included). The battery holder has a supply wire and a ground wire (bare ends), and it comes with screws and nuts so you can affix it to the chassis.